41
Wiring harnesses are removed for cleaning and rebuilding one at a time.
|
42
Wiring and most underside assemblies are removed.
|
43
Head is being gutted.
|
44
Topside teardown in process.
|
45
|
46
Proto feature here.The ball guide and ramp are normally one piece on this game they are separated by a mini post.
|
47
Clock passage optos.
|
48
The ball lock scoop is different as well and uses a small wire as a keeper.
|
49
Topside nearly stripped complete.
|
50
Minor damage at the ball drop.
|
51
Some insert raising and wear.
|
52
Playfield is out and stripped complete.
|
54
The holes marked with tape will need to be filled.
|
55
Better shot of the different ball lock configuration.
|
57
There is some wear at the skill shot scoop because one side of the scoop was missing entirely.Could not find it in the game
|
58
Minr gumball exit wear.
|
59
Underside is stripped bare.
|
60
Back to the cabinet.
|
61
Head is empty and removed from the lower.
|
62
Lower is emptied.
|
63
A very large hole is in the left side right next to the flipper button hole.
|
64
Right side is broke free.
|
65
Many holes are in the front. this is on the left.
|
66
These holes are in the front right.
|
67
I am leaning towards replacing the lower.It has many issues to fix enough where replacement would make more sense.If
|
68
Next I will start rebuilding all the coil assemblies.
|
69
Coils are in rough shape.Corrosion,aftermarket etc.
|
70
|
71
Coils torn down for polishing and rebuild..
|
72
|
73
All brackets are polished.
|
74
Ready to start rebuilding.I will replace any coils needed with NOS coils.
|
75
Magnet poles are turned and polished.
|
76
Magnets rebuilt.
|
77
Coil assemblies polished.
|
78
Coil assemblies rebuilt with NOS coils.
|
79
Playfield is now in the paint shop.
|
80
Some ground in dirt at the rocket kicker.
|
81
Mylar sections and glue have been removed.
|
82
There is a little chipping at one post.
|