1
CV sample game.Cabinet is average but solid.
|
2
|
3
|
4
|
5
Some wear and flaking common on the WPC-95 games without the vinyl underlay.
|
6
|
7
Incorrect shooter rod,missing a bolt not a big deal though.
|
8
|
9
Playfield is dirty.
|
10
Typical insert ghosting for CV.Sample playfield shows the Tickle the text and blanl round blue inserts.
|
11
Ringmaster accents are decals instead of screened.Edges are easy to spot in this picture.
|
12
Minor wear at the volt roll over right behind the boom ballon assembly.
|
13
Dirt is very deeply ground into the playfield.Should clean and sand out without issue.
|
14
Worst things about the playfield are the severly raised and flaking volt roll over in the left flipper return lane.
|
15
|
16
Another problem is the hazing of the inserts.I have seen this on many WPC-95 playfields CV and MM are the most common ones
|
17
More hazing ang ghosting.The ghosting will ne overcome .
|
18
DMD cover is broken.Another common issue for CV.
|
19
Underside is typical.Complete not hacked or buchered but dirty.
|
20
|
21
|
22
|
23
Teardown begins.
|
24
Lamp panel is cracked at the coil location.Nothing I haven't seen before on CV can be repaired without a problem.
|
25
|
26
Head is gutted.
|
27
Underside teardown is next.
|
28
Heavy assemblies like the Boom Balloon and Ringmaster are removed.Worth noting is that this game does still have it's corre
|
29
|
30
Wiring and most other underside parts removed.
|
31
The harnesses will be clean and rebuilt one at a time.
|
32
Lamp harness washed being dried.
|
33
All parts are bagged and labeled after cleaning and rebuild.
|
34
Topside teardown in process.
|
35
|
36
Playfield is out of the cabinet.
|
37
Playfield stripped bare bottom side.
|
38
Playfield bare topside.
|
39
This insert will need to be cut out and reset.
|
40
Insert cut out.
|