41
Other side is just the typical filth.
|
42
Opening the head now.I will restore the parts as I remove them.
When a game is this rough it is best to take this approac
|
43
Translite is being addressed first since it is the first thing out. The translate is very dirty.The channels are broken.
|
44
The translate glass is etched with numbers and will have to be replaced.
|
45
New backglass.
|
46
Translite cleaned and polished.
|
47
Reassembled with new channels.
|
48
The boards are suspect.The DMD controller has been replaced already so as long as it is a solid repro that should be o
|
49
The speaker panel is coming out next.
|
50
Speaker panel will be torn down and rebuilt.
|
51
Speaker panel torn down.
|
52
The plastic cover is not good.There is a burn or something in the DMD area.This is best to replace since you will alwa
|
53
The rest of the panel is cleaned,polished,repainted and now reassembled.
|
54
The front side is prepped for the new DMD plastic which I will install just prior to placing back I the game .
|
55
Now onto the lamp panel.
|
56
Lamp panel is removed.
|
57
It is badly discolored but solid so I will gut it completely first.
|
58
All wiring and hardware removed.
|
59
Wiring will be cleaned and the connectors rebuilt as needed.
|
60
Lamp panel will be sanded clean on both sides then refinished.
|
61
Lamp panel is refinished and will be rebuilt after it dries overnight.
|
62
Panel rebuilt.
|
63
|
64
|
65
New head.
|
66
New lower built to spec.
|
67
|
68
|
69
|
70
|
71
Lower primed.
|
72
Head primed.
|
73
Gutting the game entirely now.The dot controller is a repro.
|
74
This is just one of those games where everything is rigged,hacked,broken then in combination most of the minor parts(uniq
|
75
Removing the harnesses one at a time.
|
76
Wiring is removed.
|
77
Topside is almost stripped complete at this point.
|
78
Shooter lane is rough now uncovered.
|
79
Ball drop is a bit hammered also now uncovered.
|
80
Underside stripped complete.
|