41
The cabinet has other voids in it and isn't really something I would bother reworking considering there is probably w
|
42
Inside is stained and lightly corroded in terms of metal.I will try to better route the USB thing during the process.
|
43
|
44
Game has one type of flipper opto board on one side and a different version on the other.Will pick one version to go w
|
45
|
46
|
47
Underside is on par with the rest.
|
48
But connectors in various places.
|
49
|
50
More but connectors and only an inch or so from soldering points.
|
51
|
52
More butt connectors this one is on a plug no less.
|
53
Creative wiring at the flippers in the solenoid harness.
|
54
Ready to gut this game..
|
55
Wiring removed in the head,
|
56
Topside teardown in process.
|
57
Cabinet is just about emptied.
|
58
Rails were removed carefully without issue.That is good news since they can be reused.
|
59
Head gutted.
|
59a
|
60
All fragile and plated parts are carefully boxed and packed for later evalutation and rework.For now they are best put
|
61
Dealing with the playfield wiring.It is pretty poor overall on this one because of the various hacks as well as the c
|
62
As I remove the harnesses I am making corrections,enhancements and preparations for future work to ease the process
|
63
For example new thicker wiring with protections are used on motors.
|
64
Generic fragile daisy chains are eliminated and replaced on flasher sockets throughout.
|
65
Solenoid harness is removed and somewhat prepped.Further work will be done once it is cleaned and being placed.
|
66
Dealing with the lamp and switch harness now.
|
67
The sling switches are rewired with thicker wire and better solder points.
|
68
Switch harness removed.
|
69
Playfield is stripped complete.
|
70
|
71
Shooter lane is in need of work of course.
|
72
|
73
As noted lots of insert wear throughout.
|
74
|
75
|
76
Target bank is pretty chewed up now that the cliffy is off and we can see what is going on there.
|
77
|
79
Apron is stripped of the decals.I will clean sand paint and clear it prior to installing new decals then likely clea
|
80
The various parts are categorized and will be gone through one at a time.
|