167
Cabinet build is just about complete.
|
168
The wiring is being neatly run now.
|
169
Plated power box ,prop rod etc.All done in nickel so it is not too showy but looks nice and will be durable.Wiring is start
|
170 Cabinet wiring and build is complete.
|
171
|
172
|
173
Playfield has cured for quite a while and is ready to install after sanding and polishing but I think it would benefit from
|
174
Playfield is sanded .
|
175
Cleared once again.
|
176
This final coat really sealed up the shooter lane wood pores and looks great.The clear was applied over a week ago so it
|
177
Playfield is ended and ready to polish.
|
178
Playfield is polished.
|
179
|
180
|
181
|
182
Playfield t nutted underside.
|
183
T nutted topside.
|
184
New play field rails are installed.These are made of oak(Reese Rails).
|
185
Ready to assemble.
|
186
Assembly is well underway.
|
187
|
188
|
189
To lessen the common bounce out problem at the mode start hole a magnet is fixed to the deflector.
|
190
The deflector is also slid back as far as possible without catching the ball on the backside of the guide.From this conf
|
191
Underside is being wired.I am not just throwingthe harnesses back on I am completely reworking various aspects of them f
|
192
Lower GI example sockets are placed.
|
193
Short protection is placed where needed in this case the leg of the socket can come in contact with the sling switch.Tha
|
194
Socket in place with protection.
|
195
GI reworked in this section.
|
196
|
197
Switch and Lap harness are just about done.Will move to the solenoids next and should be about ready to place in the c
|
198
New harnesses and extended wiring are being placed on coil assemblies.
|
199
Plugs are being placed.Many are keyed and configured in ways that make them exclusive to each coils to minimize confus
|
200
Large multi wired assemblies like the drop target have single plugs now.
|
201
Short protections are still being placed where needed.
|
202
Coil lead protections are used in places where the tabs could be strained.
|
203
Additional lighting is added to the backboard.The cap is remoted to an better location and fixed to the panel so it c
|
204
The wiring at the flippers is fixed and shows the correct colors and is the proper gauge now.
|
205
Upgraded trough with new upgraded boards also installed.
|
206
Playfield is ready to place in the cabinet.
|