160
There is a little bordering in the blue on a few inserts. That has been mask off for repaint.
|
161
Raft bordering is being fixed in this pic.
|
162
White rework.
|
163
Beaten switch cut out are being freshed up here.
|
164
All the black border/issues are refinished.
|
165
Ready for clearing.
|
166
Replacement upper is sanded and ready to refinish as needed.
|
167
Blue drop area repainted.
|
168
That is about all that was needed to refresh the replacement upper it is now ready to clear along with the lower.
|
169
Upper playfield has been cleared.
|
170
Lower playfield cleared.
|
171
|
172
|
173
The raft area rework turned out well.
|
174
The shooter lane will remain natural.
|
175
Reassembly is in process.The underside was sanded clean and new t nuts have been installed.
|
176
|
177
Most of the through parts are installed.
|
178
|
179
|
180
Playfield is ready to flip and start re-wiring.
|
181
The switch harness is a wreck.It will need a complete rebuilb in the sene that all switches and targets will need to be re
|
182
All the switches and targets have been cut off and the harness has been complete cleaned and dried.
|
183
This is the pile of scrap targets and switches or ones that will need to be reworked.
|
184
The jet bumper switches are bad off and will need new spoons.
|
185
The jet bumper switches are completly torn apart and soaked in alcohol.The metal blades were cleaned and polished prior to
|
186
The jet bumper switch parts are ready to reassemble including new spoons.
|
187
Restored switch vs. an unrestored one.
|
188
The trough switch plate is corroded and the switches are hacked.It will be resurfaced and ew switches will be installed.
|
189
This is what is left over after replacing the rollovers.
|
190
All the new switch and target assemblies as well as the ones that were rebuilt.
|
191
Switch harness is being placed now and the new switches and targets are soldered in place as I go.
|
192
The switch harness has been run now and all the new switch associated parts are installed.
|
193
|
194
|
195
The lamp harness is now being put in place.
|
196
The lamp harness has been repaired and is in place.At this point the coils are being installed then I will run the coil ha
|
197
Coils and coil harness are now in polace and the playfield is ready to go back into the game.I had the resting brackets ch
|
198
Playfield is back in the cabinet.
|
199
It now has the correct plastics on the kicker arms.
|