41
Next is the head.
|
42
|
43
|
44
|
45
Teardown in process.
|
46
|
47
Head is gutted.I will most likely work around the foil since I don't know of a suitable replacement and it is in great shap
|
48
Work is starting on the lower.First step is to strip it back down to bare wood.
|
49
Right side bare wood.
|
50
Left side.
|
51
Left side bare wood.
|
52
Cabinet is stripped all the way around.
|
53
|
54
Ready to begin repairs on the lower.
|
55
This is the first pass to catch the deepest damage and carvings.
It is really cool to read some of it.Things like Van Hal
|
56
|
57
|
58
First application of filler is leveled.
|
59
|
60
|
61
|
62
Second application of filler is applied.Each one gets bigger and bigger as it starts to cover the deepest areas and feather
|
63
|
64
|
65
|
66
|
67
One of the most frustrating parts has been the delamination inside the front.It is very hard to work around but it is start
|
68
this is what I hope to be the final application of filler besides a few small touch ups here and there.At this point I am
|
69
|
70
The inside chocks are a bit rough and furry.I will rework them as well.
|
71
|
72
The top plate was mounted a touch off so I am working this area with filler as well to make it have a nice squarelook.While
|
73
Finish work is complete.
|
74
|
75
|
76
|
77
Cabinet is now ready to prime.
|
78
|
79
|
80
I have used a spray on expoy filler as a primer.This will ensure that the carvings are truly filled as well as seal the woo
|