243
|
244
New post are being installed(most are in place).
|
245
|
246
Almost finished.
|
247
the spinners needs some attention.Decals were used on them and obviously one was from a different game.What I have done t
|
248
the backs will be refinished.
|
249
the spinners have had the art masked and are repainted with white base.
|
250
Mylar was applied to each side so they will not wear anymore.
|
251
|
252
the apron is not too bad just has some ground in dirt,wear on the ball return side and is generally a little yellowed with
|
253
the art that is in overall good condition is masked.
|
254
White base applied with a very light gold speckle is applied then a very thin transparent coat of white base is misted bac
|
255
A coat of matte clear was applied to seal and protect.any little marks in the other colors were touched up prior to that.
|
256
Clear washers are used under all mounting points ofthe plastics to protect them.
|
257
Any nicks in the art side of the plastics were touched up,in addition all the edges were freshened up with a light sandin
|
258
All the plastics are installed.
|
259
|
260
Apron is back in place.I put a section of Mylar on both sides of the ball return section so it will not wear back out.
|
261
Thats pretty much it.The score and instructions cards are the originals.I will have a fresh set made or go with some cu
|
262
|
263
The inside is all buttoned up at this point as well.
|
264
I was able to reuse the varistor tage but do have others and will install them if I can get them remade otherwise I will h
|
265
Under the playfield is finished up.I do have the original labels from there also and will have a fresh set made to reinsta
|
266
Only other thing is to put the backglass in it.
|
267
I have installed a masking kit to tone down the displays and give them a more natural apperance when the galss is insta
|
268
Lucked into a REALLY nice backglass right here in my neck of the woods.
|
269
Glass installed.
|
270
Trying to give an idea of the look when powered up.
|
271
|
272
|
273
|
274
|