204
|
205
the lockbar has been regrained.
|
206
White felt is installed in the corners to aid in the glass install and to keep the lockbar from digging in the corners.It
|
207
Flippers are the next thing I will transefer.After a complete cleaning and rebuild.
|
208
Disassembled and cleaned.
|
209
Rebuilt with new coils,switches etc.The wiring to the switches was also replaced and is in a protective sleeve to eliminat
|
210
Flippers are now on the playfield.
|
211
Next for rebuild is the target bank.
|
212
Completely disassembled so each part can be cleaned/replaced as needed.
|
213
Reassembled with new targets and coils.I put small mylar circles over the red bull's eyes to eliminate the chance of t
|
214
I installed a plug for the switches and the coils to make the unit easy to service in the future.The plugs will easily tuc
|
214a
The hats have been removed from the replacement targets to match the original(thanks for the tip JM)
|
214b
|
215
The rest of the new lamp sockets are installed.
|
216
The new braid is being run still.
|
217
|
218
Almost done with the braid but there are still a couple more strands to run and solder.
|
220
The targets are pretty beat and yellowed so I will replace them.I don't think you can get them in the original style sdo I
|
221
Target is ready.
|
222
The sling switches are also beat I will replace tem with a better version and eliminate the bare wire daisy chain as those
|
223
New sling switches as well as slingshot arms and plungers with stronger links are installed.
|
224
The saucer eject has been rebuilt and the rest of the braid run.
|
225
The wiring harness has been removed and is been throughly cleaned.
|
226
the harness is now being set in place.
|
227
The about 25% of the harness has been soldered in starting at the top.
|
228
The slings will be rebuilt.
|
229
|
230
Sling cleaned and rebuilt with new coils and screws.
|
231
|
232
Jet bumpers prior to rebuild.
|
233
|
234
Jet bumpers rebuilt with new coils and hardware.
|
235
|
236
All the wiring has been run and the new lamp sockets have been soldered in.
|
237
Rebuilt coil assemblies are now installed.
|
238
Playfield is ready to go back in the cabinet.
|
239
Few close ups of the underside.
|
240
|
241
|
242
Playfield is back in the cabinet.
|