41
|
42
Harness cleaned rebuilt and installed.
|
43
All new bulbs and flasjers.
|
44
Translit cleaned and polished on both sides.
|
45
Cleaned glass and new channels.Translite panel is ready to shelve until it is time to install it.
|
46
New base cabinet is being prepped for refinishing.Even though it is new the cabinet requires a fair amount of work in or
|
47
New head going through the same process.
|
48
Perfected,Primed and guide coated.
|
49
Basing in black now that it has been sanded and cleaned.
|
50
|
51
Jumping a ahead a bit the cabinet is now decaled.The edges will be finished next.
|
52
Head was screened,decals applied and edges yet to be finished. .The black finish is purposely glossier than factory to he
|
53
Edges are finished and rebuild can start on the cabinet.
|
54
|
55
Gutting the donor game now so I can go through the parts and begin the transfer.
|
56
|
57
|
58
|
59
Power box will be plated and polished as appropriate. Everything about it will be back to US spec.
|
60
Power box is done.
|
61
Rebuilding all push on terminal connections so they will not be brittle and will all match.
|
62
Power box is in the cabinet.
|
63
Transformer is gone over and put in place .All parts not replaced are polished or plated as needed.
|
64
|
65
Head is being rebuilt.All boards have been serviced and will be placed once it is on the lower cabinet.
|
66
Head is mounted.All chrome trim is being placed.
|
67
Chrome mirror blades are installed on the inside to tie it all together with the outside and the more over the top nature o
|
68
|
69
New speaker panel is being built.
|
70
Upgraded speakers and a color DMD.
|
71
|
72
Back to the playfield and old stuff now.
|
73
Tearing it down so I can go through these parts prior to placing them on the replacement playfield.I have went over the re
|
74
First is the right flipper.It has the wrong bracket and is smashing the phantom flip sensor.MB uses a very specific pl
|
75
This is the correct plate as an example.
|
76
Old flippers mechs are off.
|
77
Old verses new.
|
78
I was able to make the plate up correctly.
|
79
Now for the drac mech.It is rusty but has good potential all things considered.
|
80
Torn down.I am checking and repacking the gearbox.
|