121
Now the apron.At a glance I thought it was decent.Now removed I find it is still good but has some issues to fix prior t
|
122
The wear from the ball return is normal.The rust is par for the course given the rest of the game and the nature of raw m
|
123
More rust on the backside of the apron.
|
124
The art has been spared so save for a little pit of touch up work from the normal wear and tear it is perfectly fine.
|
125
Sanded to a point of being bubble and rust free on the back side.
|
126
Ball wear and rust addressed on the return side.
|
127
Cleaned and prepped for repainting and clear.
|
128
Metal etched.
|
129
Will flip and clean once more then do any minor touch ups on the art side prior to clearing.
|
130
Apron is ready to clear.
|
131
Apron cleared.Just a light clear nothing too heavy because these can easily run or get heavy edges and do not buff well
|
132
|
133
Cabinet is built and wired.All boards were serviced prior to install.
|
134
Chrome installed as requested.
|
135
|
136
|
137
Correct tags installed.
|
138
Cabinet is neatly wired.
|
139
|
140
|
141
New lockbar receiver was needed.Even plating probably couldn't save the last one.
|
142
Now onto the ball guides.The steel ramps will be gone over new flaps and switches will be install in addition to re
|
143
Example of the regrained ramp.
|
144
New flap.
|
145
Screws polished.
|
146
Grained ball trails and other parts are being placed topside..
|
147
|
148
|
149
|
150
|
151
New post,polished parts or reconditioned where needed.
|
152
|
153
|
154
Ready to start the underside rebuild and wiring .
|
155
Bank is placed.
|
156
Drac assembly is placed at this point so I can install the upgraded brace..
|
157
Flipper mechs are in place and now correctly clear the sensor cut outs.I realized once placing the trough that I had an ad
|
158
The wiring will get an equally extensive restore.I will go through it one harness at a time starting with the switch harn
|
159
The game specific targets that I cannot replace will get new faces.These will be the red translucent Drac targets and t
|
160
The sling switches have been torn down,the brackets polished and now riveted to ne switches.I will neatly wire those
|