200
Before powering it up for testing I need to refresh the speaker panel.It is torn down.The grills are washed the wood panel
|
201
Speaker panel reassembled.
|
202
Ready tp go back in the game.
|
203
All the wiring hacks and board issues have been corrected.
|
204
No more electrical tape or incorrect connectors.
|
205
No more burned up GI soldered direct to the boards.
|
206
Powered up for testing.
|
207
Next step will be installing the bulbs in the backbox lamp panel.
|
208
Lamps installed.
|
209
|
210
Everything checked out a few adjustments were made next up is to continue the rebuild.
|
211
|
212
Like the resting brackets the corrosion was too bad on the lockbar receiver to address it normally so I had it chromed.Loo
|
213
Mini is one of the next thing to go on so that needs to be assembled
|
214
|
215
Mini is assembled well enough to get it in place.
|
216
All the ramps(except the largest one you can't get),plastics and boulders are in need of replacement so that is being swap
|
217
Mini in place along with some of the boulders and ramps.
|
218
|
219
|
220
|
221
the apron is worn almost through in the center and right side so that will be redone.
|
222
Sanded.
|
223
Base color applied.
|
224
New screen printed decals applied.
|
225
the apron has been matte cleared and installed.
|
226
More boulders and ramps have been put in place.
|
227
Just a couple parts left and the assembly will be complete.
|
228
Pretty much all done here for the rebuild.
|
229
|
230
|
231
|
232
Couple little touches left and then reay for testing and tweaking.
|
232a
Playfield rebuild complete.
|
232b
|
233
Now that the playfield rebuild is done I can start to button the game up.Starting with the translite.This one like the res
|
234
I am guessing that they used all this packing tape tro try and hold the broken channels on.Obviously they did major damage
|
235
At theis point I have cleaned and removed as much of the tape and glue as I possibly can without further ruining the trans
|
236
I have now refrosted the translite.I use a special mix of paint that will not harm the translite nor dim it.Depending on h
|
237
new glass channels are used when fitting the translite back to the glass.
|