82
Lower is primed.
|
83
The head was prefit and the pilot holes were made in the hinge blacks.
|
84
The correct countersink hole was made in the coin door area to the side of the shooter rod hole.
|
85
|
86
Head is primed.
|
87
|
88
|
89
Head is guide coated.
|
90
Lower guide coated.
After a couple days curing it will be sanded and the base color will be applied.
|
91
Head is sanded.
|
92
Lower sanded.
|
93
Prepped and ready to paint in the base color then clear coat.
|
94
|
95
Head based and cleared.
|
96
|
97
Lower based and cleared.After it sets a couple days I will sand it then begin the stenciling process.
|
98
Sanded and being prepped for stenciling.
|
99
|
100
|
101
|
102
Black stenciled.
|
103
Unmasked.
|
104
|
105
|
106
|
107
New set of legs are being prepped to paint black as well.
|
108
|
109
Gold stencil is done on the lower.This took quite a bit of correction so as a result I will clear the lower in full gl
|
110
The head will be cleared in just the black stencil,The gold stencil will require more correction so it is best to c
|
111
Head cleared.
|
112
Legs cleared.
|
113
Lower cleared.
|
114
After this sets a couple days I will sand it and start doing the final rework/repaints and clear.
|
115
Head stenciled and cleared in full gloss.
|
116
|
117
Lower sanded and prepped for final clear.
|
118
Head sanded and prepped for final clear.
|
119
Legs sanded and prepped for final clear.
|
120
Final clear applied.It is a matte clear and will dry to a semi/slightly glossed finish once cured.
|
121
|