122
Lower final cleared.
|
123
|
124
Legs final cleared.Gloss is at the correct level now that it is cured overnight.
|
125
Lower clear now cured.
|
126
|
127
Detail of final gloss level.
|
128
Prepping the lower playfield now.
|
129
Shooter lane is nice could stand to be a bit longer and wider when compared to the original playfield.
|
130
Shooter lane is reworked to be a closer match to the original.
|
131
Lower is sanded.
|
132
Cleaned and ready to clear.
|
133
Clear is applied to the lower playfield.
|
134
|
135
|
136
|
137
|
138
After this sets a few days it will be sanded and polished.
|
139
Cabinet is in the rebuild area.
|
140
New reinforced leg plates are installed and the cabinet is neatly ground braided.
|
141
|
142
|
143
Lower is up on 4 legs now.
|
144
|
145
|
146
|
147
The apron is rougher under the surface because of mild surface rust.
|
148
Better idea of the metal condition.
|
149
Apron is stripped to bare metal.
|
150
Apron is etched then primed.It will be sanded and then based in the same red paint as the cabinet then cleared prior to
|
151
Playfield is ready to sand once more then clear.
|
152
The shooter lane will be further smoothed during this session.
|
153
Playfield is sanded once more.
|
154
Final clear is applied.
|
155
Shooter lane has absorbed the clear a little more and should be well sealed from the previous process of enlargi
|
156
Playfield is sanded and ready to polish.
|
157
Playfield is polished.
|
158
|
159
|
160
With all the major parts now in place for the most part I can start working towards rebuild.
|
161
I am now going to start rebuilding all the assemblies that go in the cabinet and then assemble the cabinet.First i
|